Computer gaming chair with footrest.

Good afternoon everyone.
I present a review of a fairly popular product now – a gaming computer chair.
The chair has an interesting coloring that catches the eye. The seat height and backrest are adjustable.
in the review I will describe the assembly process with detailed photographs.
The upholstery material of this chair is PU-leather. It is a very soft material that retains its properties over a very wide temperature range. Polyurethane leather allows air to pass through, as it contains micropores.
No one has been using leatherette in furniture production for many years.

After unpacking the package, we get the following set:

The manufacturer kindly provided instructions:

Assembly is simple. You need a hex wrench, which is also included in the kit.
According to the instructions, only 8 points, the last point is not numbered.
The first step is to attach the adjustment mechanism to the seat.
Let’s take a closer look at the seat:

No suspicious defects were found. Faux leather upholstery.
The quality of the seams is normal:

The mechanism for adjusting the chair is also a supporting frame to which all the main elements of the chair are attached.
Made of fairly thick metal and looks very massive.

There are several adjustment elements on the mechanism.
Seat height adjustment lever:

Backrest tilt adjustment lever and backrest height adjustment lever:

The adjustment mechanism is attached to the seat with four 6×25 bolts. There are holes cut in the skin, it doesn’t look very neat, but everything will be closed with a mount:

There is a sticker on the bottom of the seat that indicates where the front of the seat is. Mounting holes are oval in shape to allow slight adjustment during mounting. All the holes matched with the mounting points, the bolts screwed in without problems.

The next step is to install the footrest:

The footrest rotates freely on a metal tube. The pipes look solid, I measured the wall thickness:

Close up the stand element to see the quality of the seams:

The stand is inserted into plastic guides, which in turn are fastened with two bolts to the bottom of the seat:

The holes are oval shaped for slight adjustment. All the bolts fit to the mounting points:

A bolt is attached to one side of the footrest, which limits the movement of the stand when it is extended:

The stand moves freely inside the guides, but there is no free play:

The third point is the metal element of the backrest fastening to the adjustment mechanism. It is a steel pipe welded in the shape of the letter T. It is attached with three 6×40 bolts to the back of the backrest:

Measure the wall thickness:

The backrest is made in the shape of a car seat, has side stops https://jiji.ug/removals-and-storage-services/haulage and ergonomic design:

On
there is a zipper on the back:

If there is a zipper, then you need to unzip it and see what’s inside:

Inside the filler is made of a material that resembles foam rubber, you can also see the frame. The frame is made of steel pipe, there are threaded rivets for fastening the back. everything is covered with cellophane. The frame looks very solid:

There are holes on the back, in the upper part, which are decorated with plastic inserts:

The T-shaped element also has oval holes for fastening. All the bolts have come to the attachment points:

Then the backrest is installed in the adjustment mechanism. To do this, insert the T-piece into the mounting hole. First unscrew the adjustment knob:

The adjustment is made by moving the backrest and tightening the knob. When the handle is turned, the pipe is compressed, which prevents it from moving:

The fifth point is to attach the palm rests or armrests. Armrests are made of plastic. The armrest has a prefabricated structure, which is bent with a hinge. Lined with soft pads on top:

The armrests are attached to the protruding elements on the back and seat:

The hinge on the armrest allows it to move along with the tilt of the back, which guarantees a comfortable position:

The hinge has plastic plugs. Let’s take it off:

The stops are screwed with 8×40 bolts, simultaneously to the back and seat. Let’s measure the length
armrests:

And just in case, the height:

Close up the soft pad to assess the quality of the seams:

Assembly of the cross with wheels:

The cross is made of plastic, which looks very durable. Wheels with rubber pads to avoid scratching the floor:

The wheels are simply inserted into the seats on the cross. You need to make an effort:

Only 5 wheels:

The seventh point according to the instructions is to install the gas lift into the base. The gas lift is easy to disassemble, just remove the locking plate. Let’s disassemble:

Assembled:

The gas lift is installed with a casing in the crosspiece. It sits tightly in its seat, it is not very easy to disassemble in the future:

The last numbered item is the installation of a chair on a gas lift. Everything fits tightly, there is no play, disassembly of this connection can also cause problems:

The last step is to fix the pillows for the waist and neck. Let’s take a closer look at the pillows:

The pillows are fastened with elastic straps that have plastic fasteners:

The pillows themselves have zippers. At the same time, let’s take a closer look at the seams:

Naturally, let’s unfasten the fasteners. The lumbar pillow contains foam rubber:

And the Chinese put hair in the neck pillow (just kidding) to make it softer:

The footrest just pulls forward:
< br />Then flipped:

Adjustment
chair height is made by pressing the lever. Upper position:

Lower position:

In general, we have a fairly comfortable and durable chair that can withstand a load of 120 kg. The greatest convenience can be felt while playing games in the console with a joystick, as well as watching movies.

The product was provided for writing a review by the store. The review was published in accordance with clause 18 of the Site Rules.

The product was provided for writing a review by the store. Review published in accordance with clause 18 of the Rules